A standalone nail cover and a 2022 trend that is gaining popularity among customers.

They can be applied both on the bare nail and on the base.

Base and top can be used for overcoating.

Films are applied in the same way as gel polish, after 2-4 weeks, regardless of the result of application, and their installation takes no more than 15 minutes.

Sheet size 10×15 cm;

There are 25 sizes on 1 sheet.

Product images and colors shown may vary depending on the original product, depending on the resolution and settings of your monitor, and lighting conditions when shooting.

Workshop how to apply wraps:

1. Remove previous material, do the mani and buff the nail plate, cleanse.

2. Leave only nail-like shape wraps on a basic layer to see the real size of the wrap (use wood stick)

3. Measure the width (the widest) of a nail plate with nail design tape.

4. Cut the tape  1mm less than before measured width to have space 0,5 mm from both sides. In this case you will apply the wrap neatly.

5. Match the size of the wrap and nail plate.

6. Take the wrap with a wood stick, setting the stick along the wrap center, making the wrap arc-like shape.

7. When you set the wrap use your big finger to press near the cuticle, remember to check symmetry by looking at the nail edge and matching with the center.

8. Use the wood stick smoothly in the cuticle area. You can match the wrap (when it is more than needed) and cuticle curve by cutting off spare part of a wrap (watch the video)

9. Hold the wrap near the cuticle with your big finger, and  with a little tense put the wrap along the nail plate center.

10. After that glide the wrap on both sides.

11. To file off the wrap with ease draw the wrap in the nail edge.

12. NOTICE: use the file for file mani or different one with same or higher file grit. The wrong filing can be caused by a rough file with lower grit. File off the wrap from sides to the center in one direction to avoid “wrinkles”.

13. Apply base coat (thin layer)on half of the nail sealing the edge. Cure and after that cover the whole nail plate with a thin base coat layer. Cure and apply a thin top coat.

ALSO:

Possible to apply a wrap on a previously buffed base coat/gel/poly gel 

You can heat the wraps 5-10sec only for very arc-shaped nails.

Removal wraps workshop you can find in instagram stories. DO NOT tear off the wraps.

Use gloves